SuperATV '21+ CFMoto UForce 600 Plow Pro Snow Plow

SuperATV '21+ CFMoto UForce 600 Plow Pro Snow Plow

Put Your UForce 600 to Work This Winter: Don’t let winter weather slow you down. SuperATV’s Plow Pro Snow Plow gives your CFMOTO UForce 600 the power it needs to conquer snow. You get a rugged 72” steel blade and seven angle positions to help you move snow where you need it to go. Plus, the bolt-on quick-connect system makes it easy to attach and remove your plow.

Made for Hard Winter Work: Your UForce 600 needs a plow that can handle more than a light snow dusting. That’s why we use a 10-gauge steel blade, reinforced ribs, and 4-gauge alloy cutting edge to give it the muscle it needs to push through heavy snow. The shock springs and a flip-forward design help protect against unexpected impacts. We also powder coat it to help protect against winter weather and everyday wear.

• 10-gauge steel blade
• 4-gauge leading edge
• Flip-forward design
• Two 4-gauge vertical ribs support high-impact areas
• 10-gauge horizontal support reinforces the leading edge

Dial In Your Plow Position: Get the blade right where you need it with seven angle settings from 0° to 30° and an adjustable attack angle from 52° to 65°. The winch-operated system makes raising and lowering the blade on your UForce 600 simple.

Seven Adjustable Plowing Angles:

• 0°, 10°, 20°, & 30° left or right of center
• 52° to 65° adjustable attack angle
• Height-adjustable skid shoes

Get Set Up Without the Headache: Getting your CFMOTO UForce 600 ready for snow is quick and straightforward thanks to the easy-to-install mount. The mount bolts directly to the frame with no drilling, so you can leave it on year-round without it getting in the way. When winter weather hits, the quick-connect system makes it easy to hook up your plow and start clearing.

Upgrade to Our Deluxe Accessory and Plow Angle Actuator Kit: Give your UForce 600 more control when you’re clearing snow. Our Deluxe Accessory and Plow Angle Actuator Kit adds a 3/16” steel side shield to help keep snow on the blade, 23” markers to make the blade easier to see, and a 1/8” deflector to cut down on snow spray. You’ll also be able to change the blade angle from the driver’s seat with the Plow Pro Angle Actuator.

Adjust Your Blade From the Cab: The Plow Pro Plow Angle Actuator makes it easy to change the blade angle on your UForce 600 without stopping to get out. With 1,800 lbs. of force, it can swing the blade up to 30° in either direction using a simple dash-mounted switch. It’s built to handle snow, salt, and freezing temperatures, so you can keep making adjustments without leaving the cab.

Features:

• 10-gauge steel blade
• 4-gauge steel leading edge
• 54” wide blade
• 16.25” scoop
• Seven Adjustable Plowing Angles:
  • 0°, 10°, 20°, & 30° left or right of center
  • 52° to 65° adjustable attack angle accommodates stock and lifted machines up to 3”
• Two 4-gauge vertical ribs support high-impact areas
• 10-gauge horizontal support reinforces the leading edge
• Height-adjustable skid shoes
• Bolt-on quick-connect mount is easy to install
• Winch-operated frame
• Powder-coated mounting components are weather resistant

Deluxe Accessory Kit Features:

• Side shields use 3/16” steel plating
• Plow markers are 23” tall
• Deflector made with 1/8” LDPE
• Plow Angle Actuator for in-cab adjustment

Plow Pro UTV Plow Angle Actuator Features:

• 7-7/8” stroke
• 1,800 pounds of force
• Turns plow blade up to 30 degrees left or right of center
• IP67 rated solenoid
• Water-resistant connectors
• Sealed actuator
• 3/4” chrome-plated cylinder shaft
•  Fits all Plow Pro frames

Kit Includes:

• 72” snow plow blade
• Quick-connect snow plow mount
• Snow plow frame

Deluxe Accessory Kit Includes:

• (2) Snow plow side shields
• Deflector and marker kit
• Plow Pro UTV Plow Angle Actuator Kit

Note:

• A winch is required to operate this snow plow.

Installation Instructions:

• Instructions - SPK-CF-UF800-001
• Instructions- SPK-CF-UF800-001-K18

Fitment:

• CFMoto UForce 600 : 2021+

SuperATV '25+ CFMoto UForce 800 XL Plow Pro Snow Plow

Make Snow Removal a Little Less Work in Your UForce 800: When snow starts piling up, your CFMOTO UForce 800 is ready to put in some work. SuperATV’s Plow Pro Snow Plow gives it a 72” steel blade with seven adjustable positions to make it easy to direct snow. The bolt-on quick-connect system keeps installation simple, so you can get your plow mounted and start clearing without any hassle.

Built to Handle the Heavy Stuff: When the snow piles up, your UForce 800 needs a plow that’s ready to work. A 10-gauge steel blade paired with reinforced ribs and a 4-gauge alloy cutting edge gives you serious strength, while shock springs and the flip-forward design help keep things under control when you hit an obstacle. The durable powder-coated finish adds another layer of protection from winter conditions and hard use.

• 10-gauge steel blade
• 4-gauge leading edge
• Flip-forward design
• Two 4-gauge vertical ribs support high-impact areas
• 10-gauge horizontal support reinforces the leading edge

More Control With Every Pass: Changing your blade position on your UForce 800 is simple. Choose from seven angles between 0° and 30°, then fine-tune the attack angle from 52° to 65° to get the right setup for the job. The winch handles raising and lowering the blade easily.

Seven adjustable plowing angles:

• 0°, 10°, 20°, & 30° left or right of center
• 52° to 65° adjustable attack angle
• Height-adjustable skid shoes

Ready When the Snow Hits: There’s no need to make winter prep complicated on your CFMOTO UForce 800. The mount bolts right to the frame without any drilling and can stay on year-round without causing clearance issues. When it’s time to clear snow, the quick-connect system lets you attach the plow and get moving in no time.

Upgrade to Our Deluxe Accessory and Plow Angle Actuator Kit: Make removing snow easier on your UForce 800 with a smart upgrade. The Deluxe Accessory and Plow Angle Actuator Kit adds a 3/16” steel side shield to help contain snow, 23” markers for better visibility, and a 1/8” deflector to help keep spray down. The Plow Pro Angle Actuator lets you adjust the blade angle from your seat, so you don’t have to hop out every time you want to change direction.

Adjust Your Blade From the Cab: The Plow Pro Plow Angle Actuator makes it easy to change the blade angle on your UForce 800 without stopping to get out. With 1,800 lbs. of force, it can swing the blade up to 30° in either direction using a simple dash-mounted switch. It’s built to handle snow, salt, and freezing temperatures, so you can keep making adjustments without leaving the cab.

Put Blade Adjustments at Your Fingertips: Changing the blade angle on your UForce 800 doesn’t have to mean stepping out into the cold. The Plow Pro Plow Angle Actuator gives you 1,800 lbs. of force and moves the blade up to 30° in either direction with an easy-to-use dash switch. It’s designed to keep working through snow, salt, and freezing temperatures, giving you quick control while you stay in the cab.

Features:

• 10-gauge steel blade
• 4-gauge steel leading edge
• 54” wide blade
• 16.25” scoop
• Seven adjustable plowing angles:
  
  • 0°, 10°, 20°, & 30° left or right of center
  • 52° to 65° adjustable attack angle accommodates stock and lifted machines up to 3”
• Two 4-gauge vertical ribs support high-impact areas
• 10-gauge horizontal support reinforces the leading edge
• Height-adjustable skid shoes
• Bolt-on quick-connect mount is easy to install
• Winch-operated frame
• Powder-coated mounting components are weather resistant

Deluxe Accessory Kit Features:

• Side shields use 3/16” steel plating
• Plow markers are 23” tall
• Deflector made with 1/8” LDPE
• Plow Angle Actuator for in-cab adjustment

Plow Pro UTV Plow Angle Actuator Features:

• 7-7/8” stroke
• 1,800 pounds of force
• Turns plow blade up to 30 degrees left or right of center
• IP67 rated solenoid
• Water-resistant connectors
• Sealed actuator
• 3/4” chrome-plated cylinder shaft
• Fits all Plow Pro frames

Kit Includes:

• 72” snow plow blade
• Quick-connect snow plow mount
• Snow plow frame

Note:

• A winch is required to operate this snow plow.

Installation Instructions:

• Instructions - SPK-CF-UF800-001
• Instructions- SPK-CF-UF800-001-K18

Fitment:

• CFMoto UForce 800 XL : 2025+