RPM Powersports Can-Am Maverick R Max Rear Seat Auxiliary Fuel Tank Kit

RPM Powersports Can-Am Maverick R Max Rear Seat Auxiliary Fuel Tank Kit

Take your Maverick R 4 seater further with RPM Auxiliary fuel tanks. It's no secret that these machines consume a lot of fuel, especially in Sport + mode! These tanks together nearly more than double your fuel capacity on board at 6 gallons per tank. Alleviates the concern of fuel consumption during your multi day trips, Baja pre running, or all day dune rip sessions. At the push of a switch you can refill the factory tank at 1.3+GPM. The RPM Auxiliary Tank is a non-invasive installation which means NO chassis modifications, NO crazy bracketry, & NO cutting or welding. Mounted low in the chassis under the factory seats, & at the lowest points possible allows for a well balanced car eliminating the feel of "roll" when steering in high speed corners. Included with every tank is a plug and play wiring harness complete with a momentary switch. This switch allows you to be worry free of accidentally turning on, or leaving your pumps activated and running. One switch controls multiple tanks alleviating any unneeded wiring.

RPM tanks, unlike other dangerous designs, utilize the factory tip over check valve. In the unfortunate case of a rollover, the RPM tanks would not be able to leak fuel creating a dangerous situation. This is done by the use of the factory breather system. Overfilling the factory tank is often a concern, but with RPM's unique set up, the OEM tank could reach maximum capacity and all of the excess fuel would simply be circumvented back to the auxiliary tanks, leaving your riding adventures worry free.

RPM Auxiliary fuel tanks are purchased as two separate tanks that are "per side" allowing  you to run just 1 or both tanks. In addition to this you can run these in conjunction with our front, under the seat tanks as well. This kit also allows for the tanks AND fuel lines to be clear from being near, above, or below any of the rotating drivetrain. The construction of these tanks is 6mm thick Rotomolded seamless plastic, this is about 3x thicker than a factory fuel tank.

Features:

• 6 Gallon Capacity Per Side
  
• Plug & Play Harness With Momentary Toggle
  
• 6mm Thick Rotomolded Seamless Construction (3x+Thicker Than OEM Tanks)
  
• Billet Aluminum Gas Cap
  
• Stainless Mounting Hardware Within The Rotomolded Construction

Kit Includes:

• Includes ALL Hardware
• Fittings
• Fuel Line
• Pump