Ravek CF Moto ZForce Plug & Play Apex Lights Red Running & Brake Lights

Ravek CF Moto ZForce Plug & Play Apex Lights Red Running & Brake Lights

Red Apex Lights deliver increased visibility (5x brighter than OEM brake lights) and a custom Plug & Play installation for the CF MOTO ZForce. Apex Lights are IP67-rated and 100% waterproof. Plus, they’re effectively indestructible, with polycarbonate lenses and aluminum heat-sink frames.

Each Pair of Apex Lights includes:

• Pulsing brake light feature for increased visibility
  
• Plug & Play wiring for the CF MOTO ZForce. DIY install in under 30 minutes
  
• Multi-Mount hardware: mount to body panels, roll cage, roof, or bumper
  
• Turn signal compatibility with any Plug & Play UTV turn signal kit

Included With Apex Lights

Introducing the first-ever 100% Plug & Play UTV running and brake light. With an Unlimited Lifetime Warranty and custom vehicle-specific wiring for more than 35 different UTV models, Apex Lights have raised the standard for UTV accent lighting.

Here’s an overview of what you get with the Red Apex Lights:

• Two Apex Lights. IP67-Rated, 100% waterproof and dustproof
  
• Custom Plug & Play wire harnesses for the CF MOTO ZForce
  
• Multi-Mount Hardware: mount Apex Lights to any flat body panel, roll cage, roof or bumper

Key Specs

• 5x Brighter than CF MOTO OEM rear running and brake lights
  
• 54 LEDs in each light, with perfectly diffused light output (no LED diode “hot spots”)
  
• Heavy-duty, impact-ready and scratch-resistant polycarbonate lenses
  
• Aluminum heat-sink frame
  
• Extreme lighting efficiency: 2 Amps per pair of Apex Lights

Pulsing Brake Lights

When you brake, the Red CF MOTO ZForce Apex Lights pulse rapidly. After a split second of pulsing, the brake lights then hold a standard brake light output that is 300% brighter than OEM brake lights. This pulsing effect increases visibility to trailing drivers and makes it clear you’re slowing down.

Waterproof & Dustproof. Effectively Indestructible

The CF MOTO ZForce Apex Lights are IP67-rated, 100% waterproof and dustproof lights. Each light has a smoked polycarbonate lens built to withstand 2,600 pounds of pressure per square inch.

Perfectly Diffused Light Output

The CF MOTO ZForce Apex Lights are engineered to display perfect LED diffusion. That means Apex Lights throw off a perfectly consistent, clean beam of light with no LED diode “hot spots”.

Customization

Lighting Customization & Mounting Options

Apex Lights unlock a new level of UTV customization and safety. RAVEK’s Multi-Mount hardware (included in every kit) allows you to mount Apex Lights effectively anywhere on your UTV, including:

• Exterior Body Panels (rear and/or side panels)
  
• Roll Cage
  
• Roof
  
• Bumpers

Each Apex Lights kit includes two custom RAVEK roll-bar mount adapters and two heavy-duty waterproof straps, so you can choose between either a flat surface or roll-bar mounted installation on any 1.25” – 2.5” roll bar or bumper.

Each kit also comes with hardware so you can choose between a no-drill or drill-mounted installation.

Add Lighting Higher Up on Your UTV

The original concept behind the Apex Lights was to create running, brake, and turn lighting that we could mount high up on our UTVs. We mount a few pairs of Apex lights high up on each of our machines – they dramatically increase visibility and make our machines easy to pick out of a group.

Extreme Lighting Effeciency

With only 2 Amps of draw per pair of Apex Lights, you can mount as many Apex Lights as you want to give your SxS a truly custom look.

If you have an aftermarket UTV Turn Signal Kit installed, you can sync up to 3 pairs of Apex Lights to your turn signal kit controller box.

Features:

500% Brighter Than OEM Taillights: Be prepared and visible in dusty or low-visibility conditions. The Apex Light runs 5x brighter than ZForce stock taillights. When you brake, they pulse four times before delivering 300% brighter light than OEM brake lights through their ultra-durable, 8” rigid lenses.

Customized To You With Next-Generation Diffused LEDs: Mount to ANY flat surface or 1.25”-2.5” roll bar, including bumpers. Seriously. Fully Plug & Play installation for the Pioneer in under 30 minutes with no drilling required. Add up to three sets – six lights total – on your roof, roll bar, bumper, or wherever else you can imagine. Custom diffusion panels deliver a clean, futuristic look.

Rugged, Nearly Indestructible Formed Lights: IP67-rated with heavy-duty polycarbonate lenses, aluminum heat-sink frames, and premium waterproof wiring make these lights ready for anything. We’ve rolled our UTVs and knocked them into trees at speed without leaving even a scratch on the Apex lights. Seriously. But try to avoid rolling please.

Specifications:

Installation:

Designed for DIY Installation

Our engineers designed the CF MOTO ZForce Apex Lights to install simply and securely, every time. No prior installation experience required – we promise.

First-time installers can expect to complete the DIY installation in under 30 minutes.

The CF MOTO ZForce Apex Lights include 100% custom Plug & Play wiring and mounting hardware for your CF MOTO ZForce.

RAVEK’s vehicle-specific installation video guides walk you through each step of the process to deliver a fun and efficient DIY installation experience.

Turn Signal Compatibility

If you already have a Plug & Play UTV Turn Signal Kit Installed, you can easily sync Red Apex Lights to blink in unison with your existing turn signal lights. All necessary components included.

Fitment:

• CF Moto - ZFORCE 800 Trail - 2023
  
• CF Moto - ZFORCE 950 Sport - 2023
  
• CF Moto - ZFORCE 950 Trail - 2023
  
• CF Moto - ZFORCE 800 Trail - 2024
  
• CF Moto - ZFORCE 950 Sport - 2024
  
• CF Moto - ZFORCE 950 SPORT-4 - 2024
  
• CF Moto - ZFORCE 950 Trail - 2024