Ravek Can-Am Defender Plug & Play Apex Lights Red Running & Brake Lights

SKU: RA-65-101

1 8

Ravek Can-Am Defender Plug & Play Apex Lights Red Running & Brake Lights

Name: Ravek Can-Am Defender Plug & Play Apex Lights Red Running & Brake Lights
Brand: Ravek
SKU: RA-65-101
Price: 229.95 USD
Availability: InStock

SKU: RA-65-101

$229.95

Earn $4 Fueled Cash

FREE shipping over $250

Ravek Can-Am Defender Plug & Play Apex Lights Red Running & Brake Lights

Red Apex Lights™ deliver increased visibility (5x brighter than OEM brake lights) and a custom Plug & Play installation for the Can-Am Defender. Apex Lights™ are IP67-rated and 100% waterproof. Plus, they’re effectively indestructible, with polycarbonate lenses and aluminum heat-sink frames.

Each Pair of Apex Lights™ includes:

Pulsing brake light feature for increased visibility
Plug & Play wiring for the Can-Am Defender. DIY install in under 1 hour
Multi-Mount hardware: mount to body panels, roll cage, roof, or bumper
Turn signal compatibility with any Plug & Play UTV turn signal kit

Included With Apex Lights

Introducing the first-ever 100% Plug & Play UTV running and brake light. With an Unlimited Lifetime Warranty and custom vehicle-specific wiring for more than 35 different UTV models, Apex Lights™ have raised the standard for UTV accent lighting.

Here’s an overview of what you get with the Red Apex Lights™:

Two Apex Lights. IP67-Rated, 100% waterproof and dustproof
Custom Plug & Play wire harnesses for the Can-Am Denfender
Multi-Mount Hardware: mount Apex Lights™ to any flat body panel, roll cage, roof or bumper

Key Specs

5x Brighter than Can-Am OEM rear running and brake lights
54 LEDs in each light, with perfectly diffused light output (no LED diode “hot spots”)
Heavy-duty, impact-ready and scratch-resistant polycarbonate lenses
Aluminum heat-sink frame
Extreme lighting efficiency: 2 Amps per pair of Apex Lights™

Pulsing Brake Lights

When you brake, the Red Can-Am Defender Apex Lights™ pulse rapidly. After a split second of pulsing, the brake lights then hold a standard brake light output that is 300% brighter than OEM brake lights. This pulsing effect increases visibility to trailing drivers and makes it clear you’re slowing down.

Waterproof & Dustproof. Effectively Indestructible

The Can-Am Defender Apex Lights™ are IP67-rated, 100% waterproof and dustproof lights. Each light has a smoked polycarbonate lens built to withstand 2,600 pounds of pressure per square inch.

Perfectly Diffused Light Output

The Can-Am Defender Apex Lights™ are engineered to display perfect LED diffusion. That means Apex Lights™ throw off a perfectly consistent, clean beam of light with no LED diode “hot spots”.

Customization

Lighting Customization & Mounting Options

Apex Lights™ unlock a new level of UTV customization and safety. RAVEK’s Multi-Mount hardware (included in every kit) allows you to mount Apex Lights effectively anywhere on your UTV, including:

Exterior Body Panels (rear and/or side panels)
Roll Cage
Roof
Bumpers

Each Apex Lights™ kit includes two custom RAVEK roll-bar mount adapters and two heavy-duty waterproof straps, so you can choose between either a flat surface or roll-bar mounted installation on any 1.25” – 2.5” roll bar or bumper.

Each kit also comes with hardware so you can choose between a no-drill or drill-mounted installation.

Add Lighting Higher Up on Your UTV

The original concept behind the Apex Lights™ was to create running, brake, and turn lighting that we could mount high up on our UTVs. We mount a few pairs of Apex lights high up on each of our machines – they dramatically increase visibility and make our machines easy to pick out of a group.

Extreme Lighting Effeciency

With only 2 Amps of draw per pair of Apex Lights, you can mount as many Apex Lights™ as you want to give your SxS a truly custom look.

If you have an aftermarket UTV Turn Signal Kit installed, you can sync up to 3 pairs of Apex Lights to your turn signal kit controller box.

Features:

500% Brighter Than OEM Taillights: Be prepared and visible in dusty or low-visibility conditions. The Apex Light™ runs 5x brighter than Defender stock taillights. When you brake, they pulse four times before delivering 300% brighter light than OEM brake lights through their ultra-durable, 8” rigid lenses.

Customized To You With Next-Generation Diffused LEDs: Mount to ANY flat surface or 1.25”-2.5” roll bar, including bumpers. Seriously. Fully Plug & Play installation for the Defender in under 1 hour with no drilling required. Add up to three sets – six lights total – on your roof, roll bar, bumper, or wherever else you can imagine. Custom diffusion panels deliver a clean, futuristic look.

Rugged, Nearly Indestructible Formed Lights: IP67-rated with heavy-duty polycarbonate lenses, aluminum heat-sink frames, and premium waterproof wiring make these lights ready for anything. We’ve rolled our UTVs and knocked them into trees at speed without leaving even a scratch on the Apex lights. Seriously. But try to avoid rolling please.

Specifications:

Waterproof Rating

IP67

Amperage

0.25A - 1.1A

Raw Lumens

White 1,512
Amber 1,080
Red 378

Watts

10.5 - 15.4

Temperature Rating

-40° F - 140° F
The hottest temperature recorded on earth is 134.1° f on july 10, 1913 in death valley.

Weight (oz.)

4.2

Size

7 7/8" L X 7/8" W

Installation Options

Plug & Play Harness	✔
Roll Bar Mount	✔
Adhesive Mount	✔
Drill or No-Drill	✔

Installation Instructions:

Designed for DIY Installation

Our engineers designed the Can-am Denfender Apex Lights™ to install simply and securely, every time. No prior installation experience required – we promise.

First-time installers can expect to complete the DIY installation in under 1 hour

The Can-Am Defender Apex Lights™ include 100% custom Plug & Play wiring and mounting hardware for your Can-Am Defender.

RAVEK’s vehicle-specific installation video guides walk you through each step of the process to deliver a fun and efficient DIY installation experience.

Turn Signal Compatibility

If you already have a Plug & Play UTV Turn Signal Kit Installed, you can easily sync Red Apex Lights™ to blink in unison with your existing turn signal lights. All necessary components included.