JBL Rallybar S2 - Ghost White

JBL Rallybar S2 - Ghost White

Features:

• 150Wrms Class-D Amplifier Built-in: The 150Wrms (THD <1%) Class- D amplifier ensures powerful, high quality JBL Original Legendary Sound when you take the wheel or helm.
• Multi-speaker connection by Auracast™: Expand your sound experience. Easily pair two RALLYBAR S2 speakers for true stereo or connect multiple JBL Auracast™-enabled speakers wirelessly—perfect for larger parties or multi-vehicle setups.
• Innovative Mounting Kits Design: The innovative mounting kits design (patent pending), offers multiple position combinations on top and back to accommodate a variety of installation requirements.
• Lighter Build: The RALLYBAR S2 is nearly 1 kg lighter than Gen 1, making it easier to handle, transport, and install. This weight reduction, achieved through an upgraded sound system design, delivers greater convenience without compromising durability or performance.
• IP67 Rated Water and dust Resistant: IP67 rated water resistant protects soundbar speakers from dust ingress and powerful water jets.
• JBL Legendary Sound gets an AI Sound Boost: Hit the trail with massive sound and deep, punchy bass. AI Sound Boost automatically fine-tunes your music in real time for peak power and crystal-clear performance—even outdoors at full volume.
• Support Bluetooth, USB Disk and RCA Input Audio Source Play: RALLYBAR S2 can detect the audio source automatically according to the source priority definition: USB disk >Bluetooth> RCA-IN audio source. Higher priority source can break-in Lower priority audio source.
• 3 Different Gain Settings: RALLYBAR S2 Offers 3 different Gain settings when connected by RCA audio:2V, 4V, and 6V.

Specifications:

• Transducers: 4x 2.75”(70mm) woofers; 2x 1”(25mm) Tweeters;2 x 7.2"(182.8mm)x3"(76.2mm)Racetrack Passive Radiators
• Output Power: 150WRMS;300W PEAK
• THD at Rated RMS Power: <1%
• Voltage Range: 9 - 16VDC
• Quiescent Current Draw: <0.9A
• Maximum Current Draw: 25A
• Frequency response: 45Hz-20kHz
• Signal-to-noise Ratio: > 80 dB
• Cable type: 12AWG.
• Cable length: 12 Feet (3.66m)
• Bluetooth Version: 5.4
• Bluetooth profile: A2DP V1.4, AVRCP V1.6
• Bluetooth transmitter frequency range: 2400 MHz – 2483.5 MHz
• Bluetooth transmitter power: ≤ 15 dBm (EIRP)
• RCA: 2Vrms(0.35Vrms - 2Vrms);4Vrms(0.7Vrms - 4Vrms);6Vrms(1.05Vrms - 6Vrms)
• USB format: FAT16, FAT32,EXFAT
• Soundbar Dimension: 21-5/32" x 5" x 4-5/8" (537.5 x 126.7 x 118mm)(L x W x H)
• Soundbar Weight: 9.48 lbs (4.3 kg)
• Packaging dimensions (W x H x D): 24" x 9.3" x 7.7" (611 x 236 x 195mm)
• Gross weight: 15.1 lbs (6.85 kg)

Kit Includes:

• 1x Soundbar
• 2x Security cables
• 1xSmall Wrench
• 1 x L- Small Allen wrench
• 1xT-handle hex wrench
• 2x Straps with Velcro
• 1X G -Clamp
• 1x Keychain
• 1x 12ft (3.66m) power/ground wire harness
• 2x Rubber top covers
• 2x Mount cleats
• 2x Short M8 screws
• 2x Short M5 screws
• 2x Long M5 screws
• 2x M5 screw nuts
• 4X Flat washers
• 2X C -Clamps (2" )
• 2X C -Clamps (1.75" )
• 2X Thick rubber strips (for 1.5" pole )
• 2x Thin rubber strips (for 2" &1.75" pole)
• 1x Quick start guide
• 1x Safety sheet

Installation Instructions:

• Rallybar S2