GlueTread SxS Sidewall Repair Kit

GlueTread SxS Sidewall Repair Kit

When you leave pavement, you accept that tire damage is part of the game. What you don’t have to accept is being stranded because of it. The GlueTread SxS Sidewall Repair Kit is an industry-tested, American-made solution designed specifically to repair sidewall damage in off-road environments. While most repair kits only address tread punctures, this system was engineered to solve one of the most common trip-ending failures: cuts and tears in the sidewall. This kit contains enough material to repair 4–6 tires, giving you the ability to not only get yourself out, but also help the people you ride with. Because when you’re miles from pavement, self-reliance matters.

Real Damage, Real Results: Use the slider to view a damaged sidewall before and after repair. As you can see, this repair is done entirely on the outside of the tire making it a quick and simple solution to get you back to safety.

Sidewall Repair: A puncture in the tread is inconvenient. A cut in the sidewall can leave you stranded. Sidewalls flex constantly. They aren’t reinforced like the tread area, and when they’re sliced by sharp rock, metal, or debris, most people assume the tire is done. That’s exactly why we built this system.

The GlueTread sidewall repair is designed to be completed without removing the tire from the wheel.

1. Locate and inspect the damage. Ensure it’s small and repairable.
   
2. Prepare the surface. Clean and buff the damaged area to promote a strong bond.
   
3. Apply adhesive and patch. The heavy-duty rubber patch is bonded directly over the damaged section.
   
4. Allow it to cure. Once set, the repair reinforces the weakened area and helps prevent the tear from spreading.
   

Kit Includes:

The SxS Sidewall Kit includes everything you need for sidewall repairs:

Patches:

• [1] 4” x 4.5” patches
• [3] 3” x 1.5” patches

Additional Supplies:

• [3] Tubes of GlueTread Adhesive
• [6] Applicator Tips
• [10] Pieces of Sandpaper
• [1] Instruction Manual

Specifications:

• Pressure Strength: 40 PSI
• Bond Strength: 5,000 PSI
• Patch Durometer: 75
• Initial Cure Time: 30 seconds
• Full Cure Time: 10 minutes