Demon Powersports '09 Polaris Ranger 700 Demon Bracket Lift Kit

Demon Powersports '09 Polaris Ranger 700 Demon Bracket Lift Kit

 

Take your machine to a new height!

This 4 corner lift will pick your machine making room for larger tires. This also gives your vehicle a more beefy stance while giving practicality of more ground clearance. Lift kit consists of all parts, hardware and instructions to be installed. Install time is approximately 1 1/2 to 2 hours.

This lift kit has been engineered with longevity and hard use in mind. A must have if you're wanting to get the most ground clearance out of your vehicle without harming your factory suspension.

 

Features:

• Lifts all four corners of the machine to increase ground clearance
• Increases the space between tires and fenders to allow for larger tires to be mounted
  
• Comes with all necessary hardware and instructions for an easy installation.
• Powder coated for better protection.

 

Fitment:

"PABL-6004HD|Note: 3 inch Bracket Lift|NOTE: This kit fits full size models only.

Notes:

• 1.5 inch spacers are recommended, but a MINIMUM of a 1 inch wheel spacer is required on the front if you are running 12 inch diameter factory or aftermarket wheels for the wheel to clear the tie rod with the alignment cones installed. If you are running wide tires at 1.5 inch or wider, spacer may be required depending on the width of the tire for tire to shock clearance at full lock steering
• Heavy duty after market axles are recommended for the 2011-2014 Ranger models before installing ANY brand of lift kit. The 2011-2014 model rangers have lighter duty rear axles than previous year models and are more prone to breakage."