Aftermarket Assassins S3 Clutch Kit with AA Primary for Pro XP 2020 Only
SKU: AA-102-1014/AA-107-1043/AA-108-1019/AA-108-1006

Aftermarket Assassins S3 Clutch Kit with AA Primary for Pro XP 2020 Only

SKU: AA-102-1014/AA-107-1043/AA-108-1019/AA-108-1006
$1,245.00
Custom Icon
Earn $11 Fueled Cash
This item ships FREE

Aftermarket Assassins S3 Clutch Kit with AA Primary for Pro XP

  • Fits ONLY 2020 RZR Pro XP Models 2 & 4 Seat **DOES NOT fit 2021 Models as the helix design changed**
  • This kit includes our complete heavy duty AA primary clutch. This clutch is the same design found on the 2016-2020 RZR Turbo models with an encapsulated tower design. We found this clutch to hold power better, hold up better (no exploding), and slip the belt less. It simply meets the demands of these high horsepower vehicles, and is proven. This clutch also holds belt grip better than billet clutches, especially at higher RPM's.
  • Kit Includes: AA Primary Clutch, Primary Bolt, AA magnetic adjustable clutch weights, AA primary spring, weight setup sheet, custom primary spring limiter, AA secondary spring, & our AA custom cut helix
  • Primary clutch does not come assembled. Simply setup your weights according to our setup chart, then install the weights & Spring.
  • The biggest problem with Pro XP clutching is they do not have enough belt grip. When the first Pro XP models arrived they had a soft secondary spring that slipped the belt under full shift. They were then fitted with a stiffer secondary spring and now the problem is they rev too high for good belt grip with that spring. Our kit helps combat this with a stiffer secondary spring over factory for even better belt grip, and the right primary weight/spring to get proper RPM. Our S3 clutch kit includes everything the S2 does, but adds the helix. The helix adds more aggressive shift to the secondary clutch which gives you big acceleration gains and feels more like your throttle is locked to the rear wheels.
  • Our S3 recoil clutch kits pack a huge punch! No matter the terrain, they hit hard and just keep pulling for days. On the trail or at the race you'll notice wicked acceleration and instant clutch response when getting back into the throttle after hammering that corner. In the dunes you'll see the same benefits, but also have much less bogging when climbing that big dune. The machine will hold RPM so you can get where you need to go, and get there faster! Going mudding? Our mud setup will help turn those tires through the thick and deep with much better RPM and wheel speed that's key to climbing out of that hole. We have a huge amount of CVT knowledge, a great passion for the sport, and have many hours into testing different setups in the real world. We know you'll be extremely pleased with the performance gain from our clutch kits!
  • Kits work great with both stock or modified machines
  • Works with tire or paddle sizes 28" to 32"
  • A must have when running larger tires or paddles
  • Wicked throttle response when on & off the throttle
  • More efficient power transferred to the wheels
  • More consistent clutch performance
  • Cooler running belt temps, especially with larger tires or paddles
  • Longer belt and clutch life
  • Easily adjustable if needed
  • Slightly higher engagement which is still very smooth (1800-2000 RPM)
  • Our Recoil clutch weights are easily adjustable with simple magnets. They have a custom AA profile, the BEST coating on the market(nitrocarburizing) which has increased wear resistance, improved fatigue strength, and added surface lubricity. These clutch weights also offer great performance and the ability to tune for many different applications or modification in the future, all without the need to buy extra parts. The magnetic weights are the best option to properly place the mass where we need it on the weight for best performance for your application.
  • Performance Helix 107-1043: Aggressive helix with acceleration/higher horsepower/aggressive fast pace drivers in mind. Works on Pro XP 2 seat 30-33" Dirt Tires, 30-32" dune paddles. Works on Pro XP 4 seat with 30-32" dirt tires, 28-30" dune paddles.
  • High Load Helix 107-1042: Slightly less aggressive than the 1043 helix with good acceleration gains/power transfer over the OEM helix. Designed for a heavier vehicle, heavier tires, heavy sand load or crawling type riding in mind. Works on Pro XP 2 seat 30-35" Dirt Tires, 30-32" dune paddles. Works on Pro XP 4 seat with 30-33" dirt tires, 28-32" dune paddles. Excellent all around helix for any Pro XP!
  • An initial setup guideline is included which shows the best setups for dunes, mud, or all around trail riding. This also has brief instructions on installing your clutch kit, and other important information.
  • View our installation video HERE
  • DISCLAIMER/SPECIAL NOTES ABOUT THIS CLUTCH: Primary is tight under the cover and MAY slightly contact the plastic... Making a few wear marks. The primary bolt has a turned down (shortened) head to clear under the cover. This is easier to strip, so use care when tightening. If dissembling the clutch, the 6 spring cover button head allen bolts are also easy to strip if you use the wrong size(or standard), they are a 4mm.
  • Clutch Puller Note: You will need the P90X clutch puller to remove your OEM clutch. The AA clutch uses the standard XPT/XP1000 primary clutch puller.
  • Special tools needed Compression Tool #1, P90X Clutch Puller

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Meta Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Venmo
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Aftermarket Assassins

Aftermarket Assassins S3 Clutch Kit with AA Primary for Pro XP 2020 Only

From $1,125.00

Aftermarket Assassins S3 Clutch Kit with AA Primary for Pro XP

Select Helix

  • Performance Helix 1043
  • High Load Helix 1042

Add Primary Clutch Puller

  • Include the P90X puller and the puller for the AA primary (+$120)
  • Include the P90X Puller (needed to pull the OEM primary (+$60)
  • No Thanks, I already have puller(s)
View product