Aftermarket Assassins '15+ Polaris RZR S 900/ Trail XC Custom CX 3 & 4 Power Vision Tunes
SKU: AA-RZR900S2015-PV-AO

Aftermarket Assassins '15+ Polaris RZR S 900/ Trail XC Custom CX 3 & 4 Power Vision Tunes

SKU: AA-RZR900S2015-PV-AO
$95.00
Custom Icon
Earn $1 Fueled Cash

Aftermarket Assassins '15+ Polaris RZR S 900/ Trail XC Custom CX 3 & 4 Power Vision Tunes

 

Are you looking for the most badass tunes available for your Power vision? Here you are. If tuning two vehicles with your PV4, the app will prompt you to purchase a License for the additional vehicle. We are highly experienced in tuning the RZR models and that will show. Our tunes are also easily labeled and will show rough horsepower claims with supporting mods such as exhaust and clutching. These tunes modify all the necessary maps to create big horsepower, while still maintaining a reliable and safe RZR. Each tune is built specifically for your Power vision allowing us to change the tire size or fan temp if needed.

Big horsepower gains! As you probably know, the 900 RZR motor for 2015-Up is very de-tuned from the factory. The throttle is limited by only allowing so much air to enter the motor before it closes throttle to see the acceptable amount. These limits are hard to break, especially all the way to redline. Many other tunes will open the throttle a little more at first, but then still close when you get over 8000 RPM. This is why it's important to see a dyno sheet or data log run up to top speed where it will eventually hit the rev limit. If power or throttle tapers off, you know the tune is not as good as ours. That being said, horsepower gains depend on air conditions such as temperature and altitude. If you have less air to start with such as in very hot temps, or at higher altitudes, your throttle will open more (with the stock tune) than those in low altitude or colder temps. Basically, no matter where or what temperature you ride in the stock machine will make the claimed 75 HP to the crank. Now lets say we are dynoing at low altitude on a cold Minnesota day of 10 degrees. We load this tune in for 100% throttle no matter what, now we can make huge horsepower... up to 95 crank HP. Take that same machine and go to Florida with some nice hot sticky summer weather. We might only make 85 crank HP. Point of the story is that on this particular model, your horsepower gains vary depending on temp and altitude. No matter what, we promise you will notice a huge gain and not even be close to a stock 900. Average gains for low altitude riding in 50-70 degree weather will be around 15 HP. We guarantee no one else is making any more power than our tune, despite claims of higher horsepower which were made in colder temps.

\We go the extra mile to make sure everything is gained, and have a few extra tricks up our sleeve because we test in the real world. Other maps take their time to hit peak timing numbers which really hurts performance. Our map gets you into peak timing quicker, so max power seems more instant. We also have a great fuel curve that is designed to go with our timing curve, and offers better fueling for more power at WOT. We also do some work with torque limiters as in the dirt we saw throttle closures when spinning the tires. Our map fixes that issue giving you 100% locked power delivery. We also do the easy things like up the speed limiter to where you will never hit, disable 2 foot limiters, disable seatbelt limiters & more. Basically, this is the all out tune that has all the features you want built right into it.

PV3 Users to send PV_INFO: To get your PV_INFO number simply plug your Power vision into your computer (No software is needed and this will work on an Mac or Windows computer) using the supplied mini USB cord. Wait for the POWER VISION device to pop up as a drive. Once it pops up, open the folder for this device.

PV4 Users to send PV_INFO: With your PV4 connected and app open on your phone, Hit "Scan" to search for your connected PV4. Tap on the "Dynojet PV4". Your Connected Vehicle should show your VIN and ECU information. (Verify this information matches your vehicle) Select the share icon next to "Connected Vehicle". Select your e-mail app (Gmail, Yahoo, etc.) . In the "Subject" line, fill in with your name & invoice. Please note that if your e-mail associated with your PV4 account is different than the e-mail you are using to send the info, please make special note of this and attach the e-mail associated with your PV4 account. Send the e-mail and await further instructions when we send your tune file(s).

PV3 Users to download tune(s): Simply download the tunes from the e-mail we send and find where they are located (usually the DOWNLOADS folder). Copy the tune files by highlighting them and plug your Power vision into your computer using the supplied mini USB cable. Wait for the POWER VISION to connect and open the POWER VISION drive. Then simply copy the downloaded AA tunes into the main POWER VISION folder with the rest of your supplied Dyno Jet tunes.

PV4 Users to download tune(s): Open the Power Vision 4 app on your phone. If you currently have the app open when we send the tune(s), you will need to completely close out of the app and re-open it. At the top should be a "There are shared invitations" notification. Tap on this. Tap on "Accept" to accept the tune(s) from Aftermarket Assassins. Tap on "Tunes". The new tune(s) will now be listed at the top under "My Tunes". Dyno Jet's tunes will be listed below (If applicable for your model). Tap on the tune that you want to flash. Tap "Flash Tune" If a License is needed for your vehicle, a "Redeem token" message will appear. Click "Yes" if you wish to purchase and redeem a License token for your vehicle.

Tunes are password protected so you will not be able to open or view them in the C3 tuning software. This keeps our tunes protected from copying, and gives us a good reason to keep putting in the time to make the best tunes out there

 
Features:
  • MUCH quicker throttle response and power delivery
  • Throttle by wire limiters disabled - 100% throttle!
  • AA's wicked timing curve is setup for 91 octane and delivers a huge punch in the mid-range and much better top end power
  • Fuel tables optimized for this motor and to go with our timing curve with 100% throttle
  • Fan on/off temp lowered to 190/185° Fahrenheit
  • Seatbelt limiter disabled
  • 2 Foot Limiters Disabled (gas/brake at the same time)
  • Speed limiter removed in low and high gears - Most will see 7-10 MPH actual top speed gains! 
  • Rev limit at a safe 8800 RPM
  • The Level 1: tune is a huge increase and is designed to work with the stock exhaust. A slip-on will work with this tune but you can pick up a little more by going to our Level 2 tune if you have a slip-on or full exhaust. 
  • The Level 2: tune is the same as Level 1 but with increased fueling for a slip-on or full exhaust system.
  • The Level 4: tune has modified fueling and timing maps for a big bore (please specify bore size along with any other power mods in the Special Instructions when ordering).
  • Optional kid mode tune can be added. This tune has 35% throttle maximum and 35mph. This can be customized for an extra $25 fee. E-mail us for customization.
  • To help better transfer the power gained to the wheels, and to achieve proper peak RPM, we highly recommend our AA Recoil clutch kits.

Note:
  • These tunes are for customers that already have the Power vision for the RZR 900 S, Trail or XC. If you are looking to tune two vehicles with your Power vision 3 (Not applicable to PVCX or PV4)

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Aftermarket Assassins '15+ Polaris RZR S 900/ Trail XC Custom CX 3 & 4 Power Vision Tunes
Aftermarket Assassins

Aftermarket Assassins '15+ Polaris RZR S 900/ Trail XC Custom CX 3 & 4 Power Vision Tunes

$95.00

Aftermarket Assassins '15+ Polaris RZR S 900/ Trail XC Custom CX 3 & 4 Power Vision Tunes

 

Are you looking for the most badass tunes available for your Power vision? Here you are. If tuning two vehicles with your PV4, the app will prompt you to purchase a License for the additional vehicle. We are highly experienced in tuning the RZR models and that will show. Our tunes are also easily labeled and will show rough horsepower claims with supporting mods such as exhaust and clutching. These tunes modify all the necessary maps to create big horsepower, while still maintaining a reliable and safe RZR. Each tune is built specifically for your Power vision allowing us to change the tire size or fan temp if needed.

Big horsepower gains! As you probably know, the 900 RZR motor for 2015-Up is very de-tuned from the factory. The throttle is limited by only allowing so much air to enter the motor before it closes throttle to see the acceptable amount. These limits are hard to break, especially all the way to redline. Many other tunes will open the throttle a little more at first, but then still close when you get over 8000 RPM. This is why it's important to see a dyno sheet or data log run up to top speed where it will eventually hit the rev limit. If power or throttle tapers off, you know the tune is not as good as ours. That being said, horsepower gains depend on air conditions such as temperature and altitude. If you have less air to start with such as in very hot temps, or at higher altitudes, your throttle will open more (with the stock tune) than those in low altitude or colder temps. Basically, no matter where or what temperature you ride in the stock machine will make the claimed 75 HP to the crank. Now lets say we are dynoing at low altitude on a cold Minnesota day of 10 degrees. We load this tune in for 100% throttle no matter what, now we can make huge horsepower... up to 95 crank HP. Take that same machine and go to Florida with some nice hot sticky summer weather. We might only make 85 crank HP. Point of the story is that on this particular model, your horsepower gains vary depending on temp and altitude. No matter what, we promise you will notice a huge gain and not even be close to a stock 900. Average gains for low altitude riding in 50-70 degree weather will be around 15 HP. We guarantee no one else is making any more power than our tune, despite claims of higher horsepower which were made in colder temps.

\We go the extra mile to make sure everything is gained, and have a few extra tricks up our sleeve because we test in the real world. Other maps take their time to hit peak timing numbers which really hurts performance. Our map gets you into peak timing quicker, so max power seems more instant. We also have a great fuel curve that is designed to go with our timing curve, and offers better fueling for more power at WOT. We also do some work with torque limiters as in the dirt we saw throttle closures when spinning the tires. Our map fixes that issue giving you 100% locked power delivery. We also do the easy things like up the speed limiter to where you will never hit, disable 2 foot limiters, disable seatbelt limiters & more. Basically, this is the all out tune that has all the features you want built right into it.

PV3 Users to send PV_INFO: To get your PV_INFO number simply plug your Power vision into your computer (No software is needed and this will work on an Mac or Windows computer) using the supplied mini USB cord. Wait for the POWER VISION device to pop up as a drive. Once it pops up, open the folder for this device.

PV4 Users to send PV_INFO: With your PV4 connected and app open on your phone, Hit "Scan" to search for your connected PV4. Tap on the "Dynojet PV4". Your Connected Vehicle should show your VIN and ECU information. (Verify this information matches your vehicle) Select the share icon next to "Connected Vehicle". Select your e-mail app (Gmail, Yahoo, etc.) . In the "Subject" line, fill in with your name & invoice. Please note that if your e-mail associated with your PV4 account is different than the e-mail you are using to send the info, please make special note of this and attach the e-mail associated with your PV4 account. Send the e-mail and await further instructions when we send your tune file(s).

PV3 Users to download tune(s): Simply download the tunes from the e-mail we send and find where they are located (usually the DOWNLOADS folder). Copy the tune files by highlighting them and plug your Power vision into your computer using the supplied mini USB cable. Wait for the POWER VISION to connect and open the POWER VISION drive. Then simply copy the downloaded AA tunes into the main POWER VISION folder with the rest of your supplied Dyno Jet tunes.

PV4 Users to download tune(s): Open the Power Vision 4 app on your phone. If you currently have the app open when we send the tune(s), you will need to completely close out of the app and re-open it. At the top should be a "There are shared invitations" notification. Tap on this. Tap on "Accept" to accept the tune(s) from Aftermarket Assassins. Tap on "Tunes". The new tune(s) will now be listed at the top under "My Tunes". Dyno Jet's tunes will be listed below (If applicable for your model). Tap on the tune that you want to flash. Tap "Flash Tune" If a License is needed for your vehicle, a "Redeem token" message will appear. Click "Yes" if you wish to purchase and redeem a License token for your vehicle.

Tunes are password protected so you will not be able to open or view them in the C3 tuning software. This keeps our tunes protected from copying, and gives us a good reason to keep putting in the time to make the best tunes out there

 
Features:

Note:
View product