KFI Polaris Turbo S Winch Mount

KFI Polaris Turbo S Winch Mount

Specifications:

• 100% made in USA.
• Constructed of GR50 steel
• Unlike all other mount competitors, our mounts are metal bead blasted before they are powder coated for the best possible finish prep.
• Powder coated black for supreme durability
• Complete installation instructions included
• All mounting hardware included
• Satisfaction guaranteed
• Roller fairlead and winch not included

Instructions:

• M101890_small.pdf

This new number replaces the older part #101690. The 101690 did not work with the Warn Axon Winches and spacers were required for the KFI 4500lbs winches.

Mount Designed to work with the following Winches:

• KFI: ST17 / A2000 / A2500-R2 / A3000 / SE25 / SE35
• KFI: AM-25 / AM-35 / AS-25 / AS-35
• KFI: U45-R2 / U45w-R2 / SE45-R2 / SE45w-R2
• KFI: AS-50 / AS-50w
• Warn: VRX 25 / VRX 25-S / VRX 35 / VRX 35-S / VRX 45 / VRX 45-S
• Warn: A2000 / A2500 / U2500 / 1.5ci / 2.5ci / 2.5ce / 3.0ci / 3.0ce / 3.0s
• Warn: RT15 / RT25 / RT30 / XT15 / XT25 / XT30
• Warn: Vantage 2000-3000lb
• Warn: ProVantage 2500-3500lbs
• Warn: Vantage 4000 / ProVantage 4500 / RT40 / XT40
• Warn: AXON 35 / AXON 35-S / AXON 45RC
  • Requires the purchase of spacer kit #101210
• Warn: AXON 45 / AXON 45-S / AXON 55 / AXON 55-S
  • Requires the purchase of spacer kit #101210
  • Requires some plastic trimming
• Ramsey: ATV2500 / ATV3000
• Super Winch: LT2000 / UT3000 / Terra25 / Terra35 / Terra45 / Terra 2500 (SR) / Terra 3500 (SR) / Terra 4500 (SR) / A3500 / LT2500 / LT3000 / LT4000 (SR) / LT4000ATV / LT4000UTV
• Mile Marker: PE2.5 / PE 3.5 / VMX2.5 / PE3500
• Cycle Country: Work Power 2500 / Powermax 2500 and 3500
• Badland: Standard Winches
• Badland: WIDE Winches
• Keeper Corp. Trakker: KT2500 / KT3000 / KT2500C / KT3000C
• Keeper Corp. Trakker: KT4000 / KT4000C
• SMITTYBILT: XRC 3.0 / XRC 4.0
• X-Gear: X3000 / X4000
  • 4-Hole Standard (3.00" x 4.875" bolt pattern)
• Venom: 2000 / 2500 / 3000 / 3500 / 4000 / 4500 / 5000 (Hardcore Series)
  • All with 3.00" x 4.875" bolt pattern mount-up
  • All with 3.00" x 6.600" bolt pattern mount-up
• Traveller: 1078311
• Traveller: 1078088 / 1087302
  • Requires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RF
• Possibly many others with the below standard mounting patterns, call to confirm.
  • 4-Hole (3.00" x 4.875" bolt pattern with rollers that are 4.875" bolt pattern)
  • 4-Hole WIDE (3.00" x 6.60" bolt pattern)
• QUADBOSS: RP25 / RP3

Fitment:

This mount fits out in front, similar to the Polaris OEM Mount. This mount also includes the tapped holes for mounting Polaris accessory upper bumpers. Winches will not fit behind the grill on the Turbo S models due to the oversized front differential (per Polaris design).