Bikeman Performance Polaris RZR Pro R 340HP Stage 7 Big Bore Bolt on Performer Kit

Bikeman Performance Polaris RZR Pro R 340HP Stage 7 Big Bore Bolt on Performer Kit

Features:

• 2150CC big bore
• Air extreme CNC ported head
• Free flow stainless steel slip on exhaust
• Clutch Kit with sniper weights and springs
• Cyclone clutch cover (Cools belt up to 30 degrees)
• Air extreme ported head
• Custom tuned cams
• .430 lift cams
• +1 over sized intake valves and +1 over sized exhaust vavles
• Our performance clutch springs hold better belt tension then OEM
• More responsive feel with no power lag
• Gains top speeds and low end power
• Torque monster
• Must send in ECU for tuning

Fitment:

• Fits 2022+ pro R models
• Add up to 112 HP to your pro R

Notes:

• Pro R HP ratings-
• Stock 230-235hp@8400rpm
• Stage 7, Level 7 ECU tune, Air Extreme Big Valve Head (1mm intake 1mm exhaust CNCP head)/BMP.430 lift cams, BMP muffler - 342hp at 8975rpm

Notes:

These steps are different than the service Manual. Do not follow service Manual steps. Steps for starting your pro r stage 3 and above for the first time.

• Roll the engine over by hand at least 10 revolutions clockwise when looking at it from the rear.
• Check cam timing to make sure it is correct
• Make sure coolant and oil is at the correct level.
• Start the engine and hold above 2000RPM until it reaches 170 degrees f.
• Using the throttle drop RPM 50 RPM per 30 seconds until idle seems unstable.
• Stay at the unstable RPM until it becomes stable and then repeat step 5.
• Once the machine is idling at 1450 stable with no throttle input let sit and idle for 10-15 minutes.
• Your machine is now ready to ride.
• On higher duration cams it is common to need to give a little throttle to start the vehicle this is completely normal