Antigravity SMART Clamps (XP10)
Replacement jump starter clamps for use with the Micro-Start XP-10 only. These SMART Clamps are an upgrade from the original design included with the XP-10 kit. These have an unbreakable, all copper construction with larger clamp (4″) and stronger clamping strength for good contact with the vehicle terminals. They also feature 5 built-in safety protections.
Protects from connecting the Smart Clamps in reverse polarity. The clamps will not allow User to Jump Start and will Notify User with RED LED Flashing.
If the Smart Clamps touch or are connected together accidentally the clamps will disconnect immediately and not allow Short-Circuit.
If the clamps are left on the vehicle, the Reverse Current protection will not allow a Back-Charging into the MICRO-START. In any case we still suggest never leaving the unit connected to a vehicle more than 30 seconds after a Start.
If the Current exceeds 600 amps the Smart Clamps will shut down automatically protecting the unit from damage.
When the output voltage of the MICRO-START is less than 10 Volts the clamps will not allow jump starting or further amperage discharge from the clamps.
Please refer to the images below to see how the tips (that plug into jump port) differ between the Smart Clamps. The XP-10 clamps connector tip is curved. The Old XP-3 and XP-1 clamps tips are an EC5 connector.The New XP-3 and XP-1 have thermal protection and you can see the pin hole in its clamps connector tip.
XP-10 Only
SPORT, Older XP-3 & XP-1
New XP-3 and XP-1
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Axia Alloys
Axia Alloys LED Dome Light USB Rechargeable (MODDL)
Replacement jump starter clamps for use with the Micro-Start XP-10 only. These SMART Clamps are an upgrade from the original design included with the XP-10 kit. These have an unbreakable, all copper construction with larger clamp (4″) and stronger clamping strength for good contact with the vehicle terminals. They also feature 5 built-in safety protections.
Protects from connecting the Smart Clamps in reverse polarity. The clamps will not allow User to Jump Start and will Notify User with RED LED Flashing.
If the Smart Clamps touch or are connected together accidentally the clamps will disconnect immediately and not allow Short-Circuit.
If the clamps are left on the vehicle, the Reverse Current protection will not allow a Back-Charging into the MICRO-START. In any case we still suggest never leaving the unit connected to a vehicle more than 30 seconds after a Start.
If the Current exceeds 600 amps the Smart Clamps will shut down automatically protecting the unit from damage.
When the output voltage of the MICRO-START is less than 10 Volts the clamps will not allow jump starting or further amperage discharge from the clamps.
Please refer to the images below to see how the tips (that plug into jump port) differ between the Smart Clamps. The XP-10 clamps connector tip is curved. The Old XP-3 and XP-1 clamps tips are an EC5 connector.The New XP-3 and XP-1 have thermal protection and you can see the pin hole in its clamps connector tip.
XP-10 Only
SPORT, Older XP-3 & XP-1
New XP-3 and XP-1
