{"product_id":"rpm-powersports-cfmoto-z10-silicone-charge-tube-kit","title":"RPM Powersports CFmoto Z10 Silicone Charge Tube Kit","description":"\u003ch4\u003e\u003cstrong\u003eRPM Powersports CFmoto Z10 Silicone Charge Tube Kit\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eA must-have performance and reliability upgrade for stock, tuned, and high-power machines!\u003c\/p\u003e\n\u003cp\u003eReplace your failure-prone OEM plastic and rubber plumbing with the ultimate high-flow charge tube setup. The factory charge system relies on cheap, brittle plastic and soft rubber couplers that are notoriously susceptible to heat soak, expansion, cracking, and boost leaks under high boost and extreme trail conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRedesigned \u0026amp; Re-Routed for Maximum Airflow:\u003c\/strong\u003e These are NOT simple factory-replicated silicone tubes. RPM's engineering team completely re-engineered and re-routed the plumbing from scratch, eliminating restrictive factory kinks and sharp bends and cutting the overall number of joint clamps and connection points in half to drastically reduce potential boost leak paths and failure points.\u003c\/p\u003e\n\u003cp\u003eConstructed from ultra-heavy-duty 5-ply wire-reinforced silicone, the charge tube features an embedded internal wire coil so it will never swell, expand, collapse, or burst under extreme operating heat or elevated boost pressures. The high-temp fluorolined inner wall delivers maximum resistance to oil and fuel degradation. This smooth, port-matched wall profile eliminates restrictive factory kinks and molding imperfections to minimize internal air turbulence, maximizing air velocity for faster turbo spool and razor-sharp throttle response.\u003c\/p\u003e\n\u003cp\u003eTo complete the setup, our tube integrates a precision CNC-machined 6061 billet MAP sensor flange, heavy-duty ABS barbed hose ports, and an upgraded 1\" (25mm) BOV port (replacing restrictive OEM plumbing) for vastly improved pressure relief efficiency. Every kit comes standard with a pre-installed, 6mm boost reference port—giving you a clean, plug-and-play connection ready to tap whenever you want to hook up an aftermarket boost gauge or external reference line. All single-run tubes are secured using a full set of included high-grade stainless steel HD worm clamps for a rock-solid, blowout-proof seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCustomizable Blow-Off Valve (BOV) Configurations:\u003c\/strong\u003e To match your build goals, our primary charge tube is offered in customizable BOV configurations that can be recirculated or vented to atmosphere (VTA):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo BOV \/ Use Your Own:\u003c\/strong\u003e Already have a preferred 1\" (25mm) blow-off valve from RPM or another manufacturer? Select this option to receive the complete primary charge tube and plumbing kit ready to pair with your existing valve setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Electric BOV Adapter:\u003c\/strong\u003e Includes a precision CNC-machined 6061 billet aluminum adapter allowing you to seamlessly retain your OEM electronic blow-off valve taking full advantage of our ultra-durable 5-ply silicone charge tube setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRPM SxS V2 Mechanical BOV Upgrade:\u003c\/strong\u003e The ultimate high-performance choice! Upgrades your system to our signature V2 billet mechanical blow-off valve kit. Built with an anodized 6061 aluminum body, anodized internal piston, and dual-stage internal springs, it holds higher boost reliably and eliminates damaging compressor surge. Our anodized 6061 billet aluminum TMAP sensor adapter provides a direct boost reference straight from the intake in a simple bolt-on setup. The included CFMoto Electronic BOV Bypass Connector plugs into your factory wiring to maintain proper ECM resistance (preventing CELs) and delivers that iconic, aggressive RPM \"pssh\" dump sound on deceleration!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty 5-Ply Wire-Reinforced Silicone:\u003c\/strong\u003e Zero swell, flex, or burst under elevated boost and high operating temperatures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStreamlined Single-Piece Primary Design:\u003c\/strong\u003e Cuts connection points and clamp count in half to eliminate common boost leak points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFluorolined Inner Wall:\u003c\/strong\u003e Ultra-smooth, port-matched inner bore resists oil\/fuel degradation while maximizing air velocity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBillet 6061 MAP Sensor Flange:\u003c\/strong\u003e Precision CNC 6061 billet MAP sensor mount integrated directly into the silicone tube.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBillet 6061 Boost Reference Adapter:\u003c\/strong\u003e Simple bolt on application, no modifications required (Included with RPM Mechanical BOV Kit)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpgraded 1\" (25mm) BOV Port:\u003c\/strong\u003e Standard 1\" port replaces small factory plumbing for superior pressure relief efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-Capped 6mm Boost Reference Port:\u003c\/strong\u003e Ready out of the box for optional boost gauge or reference line hookups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCFMoto Electronic BOV Bypass Connector:\u003c\/strong\u003e Included with Mechanical BOV option to safely bypass factory wiring without triggering Check Engine Lights.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eABS Barbed Hose Ports \u0026amp; Stainless Clamps:\u003c\/strong\u003e Premium barbed ports and high-grade stainless steel clamping hardware included for a leak-free seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile BOV Options:\u003c\/strong\u003e Run your choice of No BOV (BYO), OEM Electronic BOV Adapter, or RPM V2 Mechanical BOV.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% Complete Kit:\u003c\/strong\u003e Includes primary charge tube, recirculation hose, stainless clamps, and all necessary caps, hardware, and plugs for recirculated or vent-to-atmosphere (VTA) setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Bolt-On Fitment:\u003c\/strong\u003e 100% direct OEM replacement with zero cutting, trimming, or permanent chassis modifications required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFits All Years \u0026amp; Variations of the CFMoto Z10 (2-Seat \u0026amp; 4-Seat Models)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RPM Powersports","offers":[{"title":"Blue \/ No BOV","offer_id":56699606892849,"sku":"RPM-SKT-CF-2-BL","price":149.95,"currency_code":"USD","in_stock":true},{"title":"Blue \/ OEM BOV Adapter","offer_id":56699606827313,"sku":"RPM-SKT-CF-2-BL-1","price":229.95,"currency_code":"USD","in_stock":true},{"title":"Blue \/ RPM Mechanical BOV","offer_id":56699606860081,"sku":"RPM-SKT-CF-2-BL-3","price":299.95,"currency_code":"USD","in_stock":true},{"title":"Black \/ No BOV","offer_id":56699606696241,"sku":"RPM-SKT-CF-2-BK","price":149.95,"currency_code":"USD","in_stock":true},{"title":"Black \/ OEM BOV Adapter","offer_id":56699606630705,"sku":"RPM-SKT-CF-2-BK-1","price":229.95,"currency_code":"USD","in_stock":true},{"title":"Black \/ RPM Mechanical BOV","offer_id":56699606663473,"sku":"RPM-SKT-CF-2-BK-3","price":299.95,"currency_code":"USD","in_stock":true},{"title":"Orange \/ No BOV","offer_id":56699606794545,"sku":"RPM-SKT-CF-2-OR","price":149.95,"currency_code":"USD","in_stock":true},{"title":"Orange \/ OEM BOV Adapter","offer_id":56699606729009,"sku":"RPM-SKT-CF-2-OR-1","price":229.95,"currency_code":"USD","in_stock":true},{"title":"Orange \/ RPM Mechanical BOV","offer_id":56699606761777,"sku":"RPM-SKT-CF-2-OR-3","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0755\/5871\/5697\/files\/rpm-powersports-cfmoto-z10-silicone-charge-tube-kit_1.jpg?v=1791567941","url":"https:\/\/fueledutv.com\/products\/rpm-powersports-cfmoto-z10-silicone-charge-tube-kit","provider":"Fueled UTV","version":"1.0","type":"link"}